Read the CFI model on the console label before opening. These internal guides target the 2020 Disc Edition (CFI-10xxA).
CFI-11xx, CFI-12xx, Slim CFI-20xx and Pro CFI-70xx have different internal layouts. Do not transfer screw maps or drive procedures between revisions. Sony’s M.2 reference includes separate model instructions.
HDMI and internal flash are board-level components, not plug-in replacement modules.
Signs to investigate
- Damaged HDMI socket
- No display after cable and screen checks
- Board-level storage fault
Prepare your bench
- ESD-safe bench
- Microscope and board-rework equipment
Diagnose, isolate, then service
- 01
Test an alternate HDMI cable, display input and screen first. Back up accessible save data.
- 02
Have a board-repair technician inspect the unpowered port and board before choosing a replacement.
- 03
Socket removal, pad repair, electrical testing and console-specific storage work require board-level diagnosis. A board swap may affect local data.
Do not treat the M.2 expansion slot as a repair for failed onboard flash.
Stable output and normal boot, with data implications explained before repair.
Restore all covers, shielding and cable routing before powered tests. Keep each screw in its original position. If fit or resistance changes, reopen and inspect rather than tightening harder.
Technical reference & evidence
Original notes by VICEPULSE, checked against the reference below. These are concise component notes; use the matched photographic reference for exact fastener locations and connector details. The AI-generated product render is illustrative, not a service drawing.
iFixit original PS5 teardown ↗Source-checked on 31 October 2026. VICEPULSE has not bench-tested this procedure. Internal part fit must be verified against your actual revision.